Carbide Tipped Dado Heads
The Blade Carbide Tipped Dado Head is guaranteed to give you a groove as smooth and accurate as any Solid Steel Dado Head, either with or across grain, in hard or soft wood or Ply-wood.
| PART # | DIA | TOOTH | BORE | MAX CUT |
|---|---|---|---|---|
| DH630 | 6″ | 30t | 5/8″ | 13/16″ |
| DH8245 | 8″ | 24t | 5/8″ | 13/16″ |
| DH8241 | 8″ | 24t | 1″ | 13/16″ |
| DH8405 | 8″ | 40t | 5/8″ | 13/16″ |
| DH8401 | 8″ | 40t | 1″ | 13/16″ |
| DH10245 | 10″ | 24t | 5/8″ | 13/16″ |
| DH10241 | 10″ | 24t | 1″ | 13/16″ |
| DH10405 | 10″ | 40t | 5/8″ | 13/16″ |
| DH10401 | 10″ | 40t | 1″ | 13/16″ |
| DH12241 | 12″ | 24t | 1″ | 13/16″ |
| DH12401 | 12″ | 40t | 1″ | 13/16″ |
| DH14241 | 14″ | 24t | 1″ | 13/16″ |
| **14″ can be made with 40 outside teeth | ||||
| NUMBER OF CHIPPERS | ||||
| SET # | WIDTH | 1/4″ | 1/8″ | 1/116″ |
|---|---|---|---|---|
| 4 | 1-1/16″ | 2 | 2 | 1 |
| 5 | 1-9/16″ | 4 | 2 | 1 |
| 6 | 2-1/16″ | 6 | 2 | 1 |
| 7 | 2-9/16″ | 8 | 2 | 1 |
| 8 | 3-1/16″ | 10 | 2 | 1 |
| When ordering add the set # to the end of the above part number | ||||
| Multi-tooth chippers make these sets well suited for high production grooving in composite materials. Recommended for heavy duty machinery only. Packed in a wooden storage case. Set consists of 2 outside blades, 4- 1/8″ chippers, 1-1/16″ chipper. | ||||
| PART # | DIA | TOOTH | BORE | MAX CUT |
|---|---|---|---|---|
| MDH8405 | 8″ | 40t | 13/16″ | 5/8″ |
| MDH10601 | 10″ | 60t | 13/16″ | 1″ |
When furnishing sets of a width different than standard sets, cutters and saws will be priced individually rather than deducting the cost of the cutters or saws not ordered.
